Ultraviolet disinfection Maintenance:
1. Periodic inspections to ensure the normal operation of the
2. After 9000 hours of continuous use or one year the should be replaced to ensure high sterilization rate. Pay particular attention to the UV should continue in the open state, due to repeated opening and closing will seriously affect the life of the lamp.
3. Replace , first unplug the lamp power, out UV lamp. When you replace the new lamp, careful not to touch the new bulb with your fingers quartz glass, because the stain will affect sterilization lights while the lamp carefully placed inside a stainless steel sterilization
Ultraviolet disinfection work characteristics:
Disinfection speed, high efficiency, does not change the physical and chemical properties of water, do not increase the water taste and odor, unlike other disinfection methods in water disinfectant dosing will produce secondary pollutants. The device is simple to operate, easy to manage, reduce manual labor workers, is conducive to safe production. By ultraviolet irradiation of certain microorganisms in water when the bacteria or virus life-sustaining main constituent components nucleoprotein nucleic acid molecule, due to a large number of absorbing ultraviolet degeneration occurs, thereby destroying its physiological activity, so that energy absorption reach lethal, large numbers of bacteria will be killed. Ultraviolet disinfection efficiency of its wavelength, generally the highest energy at a wavelength ofefficiency in the 250-260nm range. Water after its sterilization can meet the state drinking water health standards.